Electrical Insulation Transfomers Moulds Cleaning Agent for All
Insulators IRON or Steel Moulds
TDS:
Cleaning System:
Cleaning agents for electrical insulation transformer molds can
vary depending on the specific materials being used and the type of
contaminants that need to be removed. Here are some general
considerations and options for cleaning agents:
Compatibility: The cleaning agent should be compatible with the
materials being cleaned and should not cause damage or degradation
to the molds or insulators. It is important to choose a cleaning
agent that is specifically designed for use with electrical
insulation materials.
Type of Contaminants: The type of contaminants that need to be
removed will depend on the specific application, but may include
dirt, dust, oil, grease, or other residues. The cleaning agent
should be effective at removing these contaminants without leaving
behind any residue or damaging the molds.
Safety: The cleaning agent should be safe to use and handle, and
should not pose any health or safety risks to workers or the
environment.
Environmental Impact: The cleaning agent should be environmentally
friendly and should not contain any hazardous or toxic substances.
Some potential cleaning agents for electrical insulation
transformer molds may include:
Water-based cleaning agents: Water-based cleaning agents are often
effective at removing dirt and dust from molds and insulators. They
are also typically environmentally friendly and safe to handle.
Solvent-based cleaning agents: Solvent-based cleaning agents can be
effective at removing oil, grease, and other residues from molds
and insulators. However, they may be more hazardous to handle and
may have a higher environmental impact.
Alkaline cleaning agents: Alkaline cleaning agents can be effective
at removing stubborn contaminants from molds and insulators.
However, they may be more corrosive and may require additional
safety precautions.
Overall, the choice of cleaning agent for electrical insulation
transformer molds will depend on the specific materials being used
and the type of contaminants that need to be removed. It is
important to choose a cleaning agent that is effective, safe, and
environmentally friendly, and to follow all recommended safety
procedures and guidelines when using the cleaning agent.
JT 6102 cleaning agent Product
|
For cleaning the oil stains / particles on the metal body of the
product Application
|
Composition Composition / Information: Mixture
General composition: Organic acid: 0-20% Organic amine: 10-30% Other additives: 0-5% Water: allowance
|
Avoid contacting with eyes and skin. Wear protective glasses and
gloves when handling. Inhalation of steam can cause nausea , operate in a ventilated
place, wear a breathing protector.
Storage note: Sealed in a container, indoor storage at room
temperature 0-40°C, avoid extreme hypothermia, sun exposure and
rain, keep away from heat and fire sources and store separately
from oxidants and acids.
Handling matters needing attention: prevent falling and collision.
|
 |
Producing Line:
